Alps Plate for HEX.3C

AT101 layout with alps stab holes.  A DCS version will be added if there is demand for it!

1.2mm Stainless Steel, leaf spring mounted for a softer bottom-out.  Available in two variants -- one with longer springs for a softer bottom out, and one with shorter for a more traditional feel.

For an alps build to fit in the HEX.3C, either the pins need to be clipped below the pcb, or a spacer needs to be added.  Spacers are available in brass or steel, and will be cut into 1.5mm thick stock.

The spacer is available alone here: https://karolingian.com/products/spacer-for-hex-3c