Alps Plate for HEX.3C
AT101 layout with alps stab holes. A DCS version will be added if there is demand for it!
1.2mm Stainless Steel, leaf spring mounted for a softer bottom-out. Available in two variants -- one with longer springs for a softer bottom out, and one with shorter for a more traditional feel.
For an alps build to fit in the HEX.3C, either the pins need to be clipped below the pcb, or a spacer needs to be added. Spacers are available in brass or steel, and will be cut into 1.5mm thick stock.
The spacer is available alone here: https://karolingian.com/products/spacer-for-hex-3c